If you’re about to lease a building that has stood empty for months, you’ll probably walk through it with the landlord before you sign. A walkthrough shows you the walls and floors, but it can’t show you what has collected inside the HVAC system while it was shut off.
Standing water in a drain pan or a roof leak nobody fixed can lead to mold, and dust from a build-out can spread through the ducts the first day the system runs. Commercial indoor air quality services in Glenview, IL check the HVAC system and the air before your staff move in. Below, you’ll find why empty buildings need this check, what an inspection includes, when to clean the ducts and the steps to take before you sign the lease.
Key Highlights
- Inadequate ventilation and contamination from inside or outside the building are top causes of indoor air quality problems.
- A carbon dioxide level above 1,000 ppm indoors points to inadequate ventilation.
- Keeping indoor relative humidity below 60% helps control mold, or below 50% where cold surfaces touch room air.
- Before a new or renovated HVAC system runs, a crew should check that it’s clean and protected.
Why Does a Vacant Building Need an Indoor Air Quality Check Before Move-In?
An HVAC system that has been off for months can hold problems you won’t see on a walkthrough. Federal workplace investigations have found two top causes of indoor air quality problems: inadequate ventilation and contamination from inside or outside the building.
Standing Water and Leaks Can Lead to Mold
Cooling coils and drain pans can hold stagnant water, and the OSHA Technical Manual calls for prompt cleanup and repair wherever water collects or leaks in these parts. Roof leaks and uncontrolled humidity are other moisture problems that can lead to mold. In a building no one has used for months, a slow leak can go unnoticed.
Ventilation Settings Need a Fresh Look
Building owners can refer to ASHRAE Standard 62.1, which sets minimum ventilation rates and guidelines for maintaining adequate ventilation when tenants rearrange office suites. If you’re changing the layout or bringing more people into the space, the ventilation needs a check before move-in.
What Does a Commercial Air Quality Inspection Include?
A commercial air quality inspection usually starts with the building’s history. The measurements come after a walkthrough of the HVAC system, once the inspector knows where to look.
Building and HVAC History
The inspector asks how the owner has run and maintained the HVAC system, and about any recent renovations. For a vacant building, ask the landlord for the maintenance records and the date the system last ran.
A Walkthrough of the HVAC System
The walkthrough covers the parts that affect the air your staff will breathe:
- Outdoor air intakes. They shouldn’t be close to contamination sources such as garages or building exhausts.
- Dampers and airflow. The inspector checks the damper positions and measures the airflow.
- Filters. Filters on the air handling units need regular replacement.
- Coils and drain pans. The inspector looks for standing water and signs of leaks around the cooling coils.
Measurements and Testing
Commercial indoor air quality testing uses direct-reading tools at the outdoor air intakes and in the work areas. The manual gives these guidelines for the readings:
| Reading | Guideline |
|---|---|
| Carbon dioxide | 1,000 ppm as an upper limit; higher levels point to inadequate ventilation |
| Relative humidity | 20% to 60%, with below 60% for mold control (below 50% near cold surfaces) |
| Temperature | 68°F to 76°F |
A carbon dioxide reading above 1,000 ppm doesn’t mean the building is hazardous, the manual notes. It does point to a ventilation problem that needs fixing.
When Should You Clean the Ducts Before Move-In?
Clean the ducts after any build-out or renovation, and before your staff uses the system. NADCA (the National Air Duct Cleaners Association) recommends checking that new or renovated HVAC systems are clean and protected before they run, since construction debris collects in the components.
During post-construction air duct cleaning in Glenview, IL, the crew keeps the entire HVAC system under continuous negative pressure so loosened dust doesn’t spread into the space. Ask the crew to cover every air handler and duct section the build-out touched so the commercial HVAC cleaning matches the build-out scope.
Steps to Take Before You Sign a Lease in Glenview
Plan the air quality check around your lease and build-out dates, so you can fix problems before your staff arrives:
- Ask for maintenance records. Ask the landlord for the HVAC service history and filter change dates.
- Book the inspection before you sign. The walkthrough and readings show what needs fixing while you can still discuss repairs with the landlord.
- Schedule duct cleaning after the build-out. Have the ducts cleaned once construction ends and before the system runs for daily use.
- Keep the readings. Written carbon dioxide and humidity readings give you a baseline if staff raise air quality concerns later.
Each step puts problems on paper before move-in day. If the landlord can’t share maintenance records, treat the inspection as a must before you sign.
“Leasing a building in Glenview that has stood empty? SAI Air Duct handles commercial air duct cleaning and indoor air quality services, and we’re available 24/7, including late nights and weekends, to fit your move-in schedule. Contact us or call 224-256-0071 to plan indoor air quality services for your building.”
FAQs
1. What is a good CO2 level in an office?
Below 1,000 ppm. A reading above that points to inadequate ventilation, and levels around 600 ppm go with minimal air quality complaints.
2. What humidity level should an office be?
Between 20% and 60% relative humidity. Keeping it below 60% helps control mold, and below 50% where cold surfaces are in contact with room air.
3. Do you need to clean air ducts after construction?
Yes. Construction debris collects in HVAC parts, so a crew should check that a new or renovated system is clean and protected before it runs. Plan the cleaning for after the build-out ends.
4. What causes poor indoor air quality in office buildings?
Inadequate ventilation is one of the top causes found in federal workplace investigations, along with contamination from inside or outside the building. Moisture problems such as roof leaks can also lead to mold.
5. Can a crew clean commercial ducts without shutting down the building?
Yes, if you schedule the work around your business hours. SAI Air Duct is available 24/7, including late nights and weekends, so contact us to plan a time that fits your building in Glenview.

